Blog Images

Have a different mixer?

CHANGE MIXER

Item Checklist

Click on an item purchase any item on Amazon. Items shown/linked are ZeekSquad recommended and are required unless noted otherwise.

Streaming Device (1)

Music Source (1)

FIFINE 4-Channel Line Mixer (1)

Kimafun Waterproof Wireless Microphone (1)

Speaker with Aux Port (1)

Aux Cables (2)

Audio Splitter (1)

1/4" (6.35MM) MALE TO 1/8" (3.5MM) FEMALE ADAPTER (3)

3.5MM TO 2-MALE RCA Cable

IK Multimedia iRig Stream (1)

Step-By-Step Setup Instructions

Need help? Book a Consult and we will walk you though each step and ensure everything sounds perfect.

Connect Microphone Receiver to Line Mixer

Using a 1/4" to 1/8" Adapter, connect the Microphone Bluetooth Receiver to Input 1 on the Line Mixer.

Connect Music Source to Line Mixer

Using a 1/4" to 1/8" Adapter and one Aux Cable, connect the Music Source to Input 2 on the Line Mixer.

Note: If you are using a phone or tablet you may need an adapter.

Connect Line Mixer to Speaker

  1. Connect Audio Splitter to "Output" port of mixer using a 1/4" to 1/8" Adapter.
  2. Connect (1) Aux Cable to one end of the Audio Splitter.
  3. Connect other end of the Aux Cable to Aux Port on the Speaker.


Connect Line Mixer to iRig Stream

  1. Connect (1) RCA Cable to open end of the Audio Splitter.
  2. Connect other end of the RCA Cable to iRig Stream matching the red/white colors.


Connect iRig Stream to Streaming Device

Using the supplied cable, connect the iRig Stream to your Mobile Device.

Music Source Settings

  1. Set Music Source volume to 100%.
  2. Press "Volume Down Button" 2 times.
  3. Disable BlueTooth.

If you are using a separate Computer for music, set volume to 100% in the Music Application and Computer.

Microphone Settings

If you are using a Bluetooth Headset, press or 5 times.

Mixer Settings

  1. Set Input 1 control to 5 o'clock or all the way up.
  2. Set Input 2 control to 9 o'clock.
  3. Set all other inputs to 7 o'clock, or all the way down.
  4. Set Output control to 12 o'clock.

See Troubleshooting Tips below for information on how to manage voice over music.

At Class Time (iRig Stream)

  1. Start class normally.
  2. Play music.
  3. Turn knob on iRig Stream until the light stays steady green.

Get Expert Help Now!

We guarantee your classes sound and look amazing.

BOOK CONSULT

Troubleshooting

The following are a few troubleshooting tips to address most issues related to this setup. Please feel free to Contact Us or Schedule a Consult.

  • If you get feedback
    Be sure you are at least 5 feet away from the speaker and be sure to point it away from you. Do not have your audio pointed straight at you.

  • If your voice is too low/high for participants
    Using "15 minute" increments, gradually increase/decrease the Input 1 (Microphone) knob on the mixer until desired. DO NOT adjust the Music Source volume!

  • If the music is too low/high for participants
    Using "15 minute" increments, gradually increase/decrease the Input 2 (Music Source) knob on the mixer until desired. DO NOT adjust the Music Source volume!

  • If the overall volume too high/low for participants
    Using "15 minute" increments, gradually increase/decrease the Output (or Master) knob on the mixer until desired.

  • If the music is distorted (underwater, tinny, canny) for participants
    Double check you performed Step 6 above. If settings are correct, press Volume Down Button on Music Source, one press at a time, until resolved.

  • If the music is too low/high for you
    Set the Speaker volume to the desired level. DO NOT use Music Source to adjust your volume. Adjusting the speaker does not affect your students.

  • Hearing your students
    With this method you will have to disconnect the iRig Stream from your device to hear your students through the streaming device.

  • If your participants are still hearing ambient sound
    Verify the iRig is operating correctly by verifying the lights are on. If there are none, disconnect then reconnect the iRig Stream to your device. The lights will turn on when it is working properly.

  • If the iRig Stream is not powering on
    Disconnect then reconnect the iRig Stream to your device. Please note the lights only turn on when an application that uses the microphone is active such as Zoom or Camera.

Important Final Notes

First and foremost, thank you! Should you have any questions relating to this setup please feel free to Contact Us or Schedule a Consult.

  • Always remember to check your connections!
    • Verify all items are plugged in and tight.
    • All cables are damage free.
    • Verify items are powered on.
    • Turn off Bluetooth on music source, streaming device, and speaker.
    • Set Speaker to Aux Mode (if needed).

© 2020-2024. All Rights Reserved. This website is intended for informational/educational use only and it is not affiliated or endorsed by Zumba Fitness, LLC. Zumba, Strong Nation, ZIN, ZJ, ZES, SYNC, ZIN Studio, and all related logos are trademarks of Zumba Fitness, LLC. All rights reserved. Used under ZIN & SYNC licenses.